Select from our benchmarked uncooled infrared camera series designed for electrical diagnostic, predictive maintenance, and OEM smartphone integration.
Understanding microbolometer focal plane arrays (FPA), spectral responsiveness, and high-precision radiometric calibration for industrial OEM integration.
Industrial IR sensors utilize Vox (Vanadium Oxide) or a-Si (Amorphous Silicon) uncooled focal plane arrays (UFPA). Thermal radiation in the Long-Wave Infrared (LWIR) band of 8μm to 14μm is focused onto micro-machined bridge structures, causing measurable resistance changes that convert directly into calibrated surface temperatures.
By transitioning from metal vacuum sealing to Wafer-Level Packaging (WLP), modern industrial IR sensor suppliers achieve drastically reduced module footprints, lighter weights, and lower cost points. This enables effortless integration into handheld smart diagnostics, autonomous robotics, and mobile phone thermography hardware.
Noise Equivalent Temperature Difference (NETD) is the key metric for thermal sensitivity. A lower NETD (<40mK) guarantees subtle thermal gradient detection. Coupled with multi-point blackbody radiometric calibration, industrial IR sensors deliver precise absolute thermal mapping required for high-risk diagnostic environments.
The convergence of artificial intelligence and infrared sensing is reshaping industrial non-destructive testing (NDT). Next-generation IR sensors leverage dual-spectrum image fusion (visible + thermal), real-time neural network edge enhancement, and micro-pitch pixels (down to 7μm). Suppliers and exporters are expanding from raw hardware delivery to turnkey edge-AI radiometric sensor systems capable of auto-detecting gas leaks, electrical arc hazards, and mechanical friction spikes prior to equipment failure.
| Model Series | IR Resolution | Pixel Pitch | Temperature Range | Thermal Sensitivity (NETD) | Primary Industrial Application |
|---|---|---|---|---|---|
| H1FB Mobile Series | 160 × 120 | 17 μm | -20°C to 150°C / 550°C | < 50 mK | HVAC Diagnostics, Building Energy Audits, DIY Electrical |
| DP-12D & DP-25D Series | 256 × 192 | 12 μm | -20°C to 550°C | < 40 mK | Factory Predictive Maintenance, PCB Thermal Analysis |
| DP-25DR Dual-Light | 256 × 192 + Visible | 12 μm | -20°C to 550°C | < 40 mK | Substation Inspections, High-Voltage Switchgear Monitoring |
| DP-64D Ultra High-Res | 640 × 512 | 12 μm | -20°C to 1200°C | < 35 mK | Metallurgy, Smelting, Petrochemical Plant Process Control |
From smart utility grids to automotive electronics manufacturing, discover how global businesses integrate high-performance thermal imaging.
Industrial thermal imagers identify localized hot spots caused by loose connections, oxidized contacts, or unbalanced phase loads in power grid transformers, busbars, and circuit breakers. High-resolution radiometric cameras allow maintenance crews to scan dangerous high-voltage assets from safe standoff distances.
During circuit design and stress testing, embedded micro-IR modules capture sub-millimeter thermal anomalies on Printed Circuit Boards (PCBs). Engineers detect overloaded MOSFETs, failing capacitors, and short circuits in real time, dramatically shortening design validation cycles for consumer and automotive electronics.
Thermal leaks, hidden pipe blockages, moisture intrusion, and air duct sealing failures are invisible to the naked eye. Handheld and smartphone-connected thermal imagers allow building inspectors, HVAC contractors, and energy auditors to quantify heat loss and deliver visual verification reports to facility managers.
Rotating machinery, motor bearings, drive belts, and pumps exhibit thermal spikes due to excessive friction or mechanical misalignment. Industrial IR sensors enable predictive condition-based monitoring, allowing maintenance engineers to replace worn parts during planned downtime rather than suffering catastrophic operational stops.
By connecting low-power consumption thermal modules (such as the H2FB and H1FB series) directly to smartphones via USB-C or Lightning connectors, field technicians transform mobile phones into powerful diagnostic stations equipped with professional reporting software, cloud backup, and instantaneous image sharing.
In high-temperature industrial environments such as foundry smelting, glass forming, and plastic extrusion, non-contact thermal imagers measuring up to 1200°C ensure strict quality control. They continuously feed real-time surface temperature gradients back into automated PLC control loops.
Direct factory strength backed by publicly listed enterprise R&D platforms, automated optical assembly, and stringent engineering quality management systems.
Shenzhen Dianyang Technology Co., Ltd. is a subsidiary of VHD (Shenzhen VHD Technology Co., Ltd.), a publicly listed company on the Shenzhen Stock Exchange. This strategic affiliation gives Dianyang unique access to VHD’s advanced R&D platforms, high-precision manufacturing systems, and rigorous quality management practices—enabling us to deliver thermal imaging products of higher reliability and consistency than typical ODMs.
We specialize in ODM/OEM services for infrared thermal imaging solutions, including handheld thermal imagers, smartphone-connected thermal cameras, thermal analyzers, and thermal imaging telescopes. Our products serve global customers in power inspection, building diagnostics, firefighting, industrial maintenance, and outdoor applications.
Our dedicated engineering team applies Design for Manufacturing (DFM), Design for Testability (DFT), thermal simulation, and EMC pre-compliance analysis to optimize performance and accelerate development. We also support clients in obtaining key certifications such as CE, FCC, RoHS, REACH, CB, UKCA, KC, and PSE.
Eliminating market entry barriers with comprehensive international product certifications and dedicated B2B technical support.
Fully compliant with European Union and United Kingdom electromagnetic safety and industrial device emission protocols.
Certified under Class A/B digital device emissions for seamless commercial deployment across North American markets.
Strict environmental control over raw materials ensuring heavy-metal-free and eco-friendly manufacturing.
Tailored certification packages for East Asian distribution network requirements (South Korea, Japan, Global CB scheme).
Expert answers regarding thermal core procurement, custom software development kits (SDK), minimum order quantities, and export logistics.
Browse remaining models in our catalog available for global export, wholesale pricing, and OEM custom rebranding.
Dianyang
